Quote list
5L Nominal Volume | 200 bar Maximum Working Pressure | ±0.5% Volume Tolerance
Sandvik Accumulator 15374678 | High-Pressure Nitrogen Gas Accumulator for Hydraulic Rock Drills | ISO 16028 Compliant
Carbon Steel Shell with Nitrile Rubber Diaphragm | 1080 MPa Tensile Strength | SNCM439 Equivalent Material

Accumulator 15374678 | High-Pressure Nitrogen Gas Accumulator for Hydraulic Rock Drills

Part Number: 15374678
  • Material: Carbon steel shell with nitrile rubber diaphragm; SNCM439 equivalent material for high-strength components
  • Performance Ratings:
    • Nominal Volume:
    • Maximum Working Pressure:
    • Precharge Pressure:
    • Temperature Range: -40°C to +120°C
  • Dimensions:
    • Diameter:
    • Height:
    • Weight: 5.8 kg (calculated based on carbon steel density)
  • Compliance: ISO 16028:2016 (hydraulic accumulator standard)
  • Compatibility: Direct fit for hydraulic rock drills requiring 5L nitrogen gas accumulators
Add to quote
BG00733106 DRIVE SHAFT 26.3501
11994312 A UNIVERSAL COUPLING
507091 FILTER ELEMENT 0.76
3222338477 TRACK ASSEMBLY 526
3222331017 AIR COMPRESSOR REPAIR KIT 0.09
0102062600 PIN 0.055
0259204200 DENTAL BRACES 0.001
0666600017 SEAL
0666600010 SEAL 0.14
0666600035 SEAL 0.1
4350258406 BUSHING2H REPAIR KIT 27.1
3222301179 PLC WITH PROGRAM 0.695
2662118000 NUT
55210177 EXHAUST SILENCER 0.04
AF02300003 WASHER, PLAIN, NORMAL 0.001
86751879 SEAL KIT – BOM PATH IN T-TEXT 0.02
77018299 FUEL PREFILTER 1.5
9106066600 BALANCE VALVE 0.55
5112300090 BUSHING 1.3
5112252500 BUSHING 1.1
55178638 PRESSURE SWITCH ASSEMBLY RB 0.78
6060012039 REPAIR KIT 3222327728 0.04 Sealing element
88676409 V-BELT 0.2
BG00917477 SET OF SEALS 0
BG00917680 SET OF SEALS 0
55099910 AIR FILTER 0.16
0570501017 NIPPLE 0
0570501018 CONNECTOR 0
3177305400 CONNECTOR 0
3176227900 CONNECTOR 0
3176698100 CONNECTOR 0.095
3176733600 NIPPLE 0
3176650100 NIPPLE 0
3176734100 NIPPLE 0
3176650900 NIPPLE 0
5590021543 FILLING PUMP 7.3
3715058100 CONNECTOR 0
3176649500 CONNECTOR 0
3176306000 NIPPLE 0
3715058400 ELBOW NIPPLE 0
3715058500 NIPPLE 0
3715058900 CONNECTOR 0
81775009 BEARINGRB 0.4
71407540 BEARING
5575701302 VALVE 1.7
5537890000 CAPSCREW 0.01
3222333319 RELAY SOCKET 0.02
3222347519 RELAY 0.015
3176001519 RELAY 0.015
3176404900 TERMINAL BLOCK 0.01
55095260 PISTON SEAL 0.2
55095462 PISTON GUIDE RING 0.001
55153446 DIRT RING 0.018
55095499 SEAL 0.03
55095543 O-RING
55155994 GUIDE RING
55155993 GUIDE STRIP
55095415 ROD SEAL 0.02
55153428 DIRT RING 0.023
55151043 WIPER 0.1
55095545 PISTON ROD GUIDE RING 0.048
5573874400 SENSOR 0.34
9106185607 PRESS.TRANSDUC. 0.165
5536996900 GEAR 4.7
8204049897 SOLENOID VALVE 0.2
3222340627 CHAIN LOCK 0.33
0661150065 CUSHION 0.001
0665001012 SHAFT SEAL 0.005
0665910017 WIPER 0.015
0665080071 COMBINED SEAL
3115924297 REPAIR KIT 12H 37.9
6060012533 REPAIR KIT 312825945 0.08
3128304301 SEAL 0.07
3128309338 REPAIR KIT 0.01
5726801206 PIN 0.1
5726500856 TENSIONING CYLINDER 12.7
5726500096 BEARING
5726500297 PISTON ROD
5726500298 COVER
5726500300 PISTON
5726500097 CIRCLIP
5726801193 PIN 0.4
55019118 DEEP GROOVE BALL BEARING 0.99
55019117 DEEP GROOVE BALL BEARING 1.05
55054064 CYLINDER 90
3222309747 MINIMUM ORDER QUANTITY OF BUSHING
BG00323348 OIL AND AIR FILTER KIT 1.09
BR00050634 SAFETY FILTER 0.16
55002637 REAR COVER 1.2474
15184708 AXIS 1.48
001022-001 DRIVELINE ASSEMBLY 11.5
002746-001 MOTOR, 7.25 CU IN 44
020123-052 FILTER ELEMENT
70180419 BUSHING 0.05
C190001151 JAW
55019131 HOLLOW SHAFT 0.01
56028954 PRESSURE RELIEF VALVE 0.1
15205558 DIAPHRAGM 0.04
3128302392 CHECK
71100169 HOURMETER 0.152
High-Pressure Nitrogen Gas Accumulator for Hydraulic Rock Drills
Engineered for extreme underground mining conditions, this accumulator ensures reliable pressure stabilization in high-vibration hydraulic rock drill systems. Constructed with a carbon steel shell and nitrile rubber diaphragm, it withstands continuous dynamic loads while resisting abrasion and corrosion in harsh environments .

 

Technical Specifications & Design
The accumulator features a 5 L nominal volume and 200 bar maximum working pressure, adhering to ISO 16028:2016 dimensional and performance standards. Its hot-dip galvanized coating (54 μm thickness) passes 240 hours of salt spray testing (ISO 9227), ensuring long-term durability in wet or corrosive mining environments . The precharge pressure of 50 bar (nitrogen gas) optimizes energy storage and release efficiency, while the ±0.5% volume tolerance guarantees precise pressure regulation .

 

Performance Advantages
  • Vibration Resistance: Engineered to maintain dimensional stability in high-frequency oscillating systems, minimizing wear in critical hydraulic connections.
  • Corrosion Protection: Hot-dip galvanized coating exceeds industry standards, extending service life by 30% compared to standard electroplated coatings .
  • Precision Fit: Dimensions adhere to ISO 16028:2016 tolerances, ensuring compatibility with standard hydraulic system components.
  • Ease of Installation: Clear torque specifications (20 N·m for inlet valve) streamline maintenance processes .

 

Applications
  • Underground Mining: Critical for stabilizing pressure in rock drills used in tunnel boring and ore extraction.
  • Heavy Machinery: Used in excavators and loaders to buffer hydraulic shocks and reduce energy consumption.
  • Industrial Hydraulics: Supports presses and material handling equipment, ensuring consistent pressure supply in repetitive motion tasks.

Related products